
Walrus Audio Finch 9V DC 500mA Power Supply
$11.99
Price checked at Walrus Audio.
Shop at Walrus AudioFits: the output gives 9 V, center negative, up to 500 mA. The pedal needs 70 mA.
The JHS 3 Series Pherb needs 9 V DC, center negative, and draws 70 mA, says JHS Pedals. A supply output fits when it gives 9 V, center negative, and at least 70 mA. 11 supplies below meet this by their makers' own numbers.
Each powers this pedal alone.

$11.99
Price checked at Walrus Audio.
Shop at Walrus AudioFits: the output gives 9 V, center negative, up to 500 mA. The pedal needs 70 mA.

$30.00
Price checked at Empress Effects.
Shop at Empress EffectsFits: the output gives 9 V, center negative, up to 2,500 mA. The pedal needs 70 mA.

$35.00
Price checked at Death By Audio.
Shop at Death By AudioFits: the output gives 9 V, center negative, up to 3,000 mA. The pedal needs 70 mA.
Use one of these when the JHS 3 Series Pherb shares a board with other pedals. Add up the current of each pedal on each output.

$149.99
Price checked at MONO.
Shop at MONOFits: 5 outputs give 9 V, center negative, up to 500 mA. The pedal needs 70 mA.

$199.99
Price checked at MONO.
Shop at MONOFits: 6 outputs give 9 V, center negative, up to 500 mA. The pedal needs 70 mA.

$249.99
Price checked at MONO.
Shop at MONOFits: 10 outputs give 9 V, center negative, up to 500 mA. The pedal needs 70 mA.

$289.00
Price checked at Creation Music Co.
Shop at Creation Music Co.Fits: 7 outputs give 9 V, center negative, up to 660 mA. The pedal needs 70 mA.

See current price at Creation Music Co.
Shop at Creation Music Co.Fits: 5 outputs give 9 V, center negative, up to 500 mA. The pedal needs 70 mA.

See current price at Creation Music Co.
Shop at Creation Music Co.Fits: 5 outputs give 9 V, center negative, up to 500 mA. The pedal needs 70 mA.

See current price at Creation Music Co.
Shop at Creation Music Co.Fits: 9 outputs give 9 V, center negative, up to 500 mA. The pedal needs 70 mA.

See current price at Creation Music Co.
Shop at Creation Music Co.Fits: 5 outputs give 9 V, center negative, up to 500 mA. The pedal needs 70 mA.
Source: JHS Pedals product page, read November 22, 2026.
This page lists only supplies whose maker states an output with 9 V, center negative polarity and at least 70 mA. An output with another voltage, the other polarity or less current is not a fit by these numbers.
JHS Pedals states: “POWER – 9VDC center negative, 70mA. Do not exceed 9VDC or the warranty is void. CONSUMES 70mA. DO NOT USE MORE THAN 9VDC. DAMAGE MAY OCCUR AND YOUR WARRANTY WILL BE VOIDED.”
Every supply on PedalRail has at least one output that meets the numbers.
It needs 9 V DC, center negative, with at least 70 mA of current, by the JHS Pedals product page.
JHS Pedals states 70 mA. Use this number when you add up the current on one output.
The JHS Pedals product page does not state the plug size. Check the manual before you connect a supply.
Yes, when that output gives 9 V, center negative, and 70 mA or more. The list above shows the supplies whose makers state such an output.
Updated . Maker facts read November 22, 2026.
Cite this page: PedalRail, “Power supply for the JHS 3 Series Pherb”, https://pedalrail.com/power-for/jhs-pedals-3-series-pherb/, updated November 22, 2026.